Latex Catsuit CF-CAS003

This method of making Latex clothing gives more security to well-fitting clothing.

If your dimensions are the same (or very similar) to the dimensions listed in the table - select this option.

If your dimensions are the same (or very similar) to the dimensions listed in the table - select this option.

If your dimensions are the same (or very similar) to the dimensions listed in the table - select this option.

If your dimensions are the same (or very similar) to the dimensions listed in the table - select this option.

If your dimensions are the same (or very similar) to the dimensions listed in the table - select this option.

If your dimensions are the same (or very similar) to the dimensions listed in the table - select this option.

If your dimensions are the same (or very similar) to the dimensions listed in the table - select this option.

If your dimensions are the same (or very similar) to the dimensions listed in the table - select this option.

If your dimensions are the same (or very similar) to the dimensions listed in the table - select this option.

If your dimensions are the same (or very similar) to the dimensions listed in the table - select this option.

If your dimensions are the same (or very similar) to the dimensions listed in the table - select this option.

If your dimensions are the same (or very similar) to the dimensions listed in the table - select this option.

30

30

30

30

30

Khaki, 0.25 mm thick

Lilac banner

Lilac banner

Lilac banner

Modification with a separate head mask: The front 3-way zipper, starting at the front of the neck, continues through the abdomen, crotch and ends at the back approximately in the plane of the waist.

Modification with a separate head mask: The front 1-way zipper, starting at the front of the neck, continues across the abdomen and ends approximately in the plane of the navel.

The front 1-way zipper, starting at the front of the neck, continues across the chest and ends about in the plane of the navel. Just a few cm below the lower abdomen, a 2-way zipper runs through the crotch and ends at the back approximately in the plane o

Modification with a separate head mask: Rear 3-way zipper starting at the back of the neck, continuing over the back, crotch and ending at the front of the lower abdomen.

Modification with attached head mask: Rear 3-way zipper starting at the top of the head, continuing over the back, crotch and ending at the front of the lower abdomen.

Modification with a separate head mask: Rear 1-way zipper starting at the back of the neck, continuing over the back and ending approximately in the plane of the kidneys. In this modification, there is no zipper in the crotch.

Modification with attached head mask: Rear 1-way zipper starting at the top of the head, continuing over the back, and ending approximately in the plane of the kidneys.

Modifications with a separate head mask: Rear 1-way zipper starting at the back of the neck and ending in the plane of the kidneys + 2-way zipper in the crotch, starting at the back of the coccyx and ending at the front of the lower abdomen. Breaking the

The back 2-way zipper starts at the top of the head, continues vertically downwards and ends about in the plane of the kidneys + 2-way zipper starting at the back of the coccyx, continuing through the crotch and ending at the front of the lower abdomen. B

Modification with a separate head mask: the 1-way shoulder zip brings the advantage of a smooth design of the front and back of the Catsuit. The length of the zipper is about 30 cm. There is no additional zipper for this variant.

Modifications with a separate head mask: 1-way shoulder zipper + 2-way crotch zipper. The shoulder zipper maintains the smooth design of the front and back. The length of the zipper is about 30 cm. 2-way zipper in the crotch, starting at the back on the c

The catsuit is completely without zippers and the entrance to the catsuit is an opening for the neck. It is not so complicated, but it requires a lot of patience and more time when dressing and undressing. We recommend only slim figures with good momentum

Modification with a separate head mask: 2-way zipper in the crotch starting at the front on the lower abdomen and ending at the rear about in the plane of the coccyx. The Catsuit has no other zipper and you must use a neck hole to enter the Catsuit - watc

Special back zipper for those who want to keep the front and back design clean. The horizontal part covers the width of the shoulders and the zipper sliders converge to the center together with the vertical slider. There is a 2-way zipper in the crotch.

Oblique (diagonal) zippers for trouble-free dressing Catsuit. The front and back remain smooth and maximally comfortable. 2-way zipper in the crotch.

Modification with attached head mask: Special rear zipper for those who want to maintain a clean design of the front and rear of the Catsuit. The horizontal part covers the width of the shoulders, vertical up to the top of the head (see picture).

Modification with attached head mask: Special rear zipper for those who want to maintain a clean design of the front and rear of the Catsuit. The horizontal part covers the width of the shoulders, vertical up to the top of the head (see picture), + 2-way

Quality Jakpon zipper YKK.

Quality Jakpon zipper YKK. The zipper and the slider itself are in a metallic look.

Quality Jakpon zipper YKK.

Quality Jakpon zipper YKK.

Quality Jakpon zipper YKK.

Quality Jakpon zipper YKK.

Quality Jakpon zipper YKK.

Quality Jakpon zipper YKK.

Quality Jakpon zipper YKK.

Quality Jakpon zipper YKK.

Gloves are not attached to the Catsuit and are not included in the delivery. The sleeve ends with a reinforced seam on the wrist.

On the inside of the forearm, there is about a 20 cm long 1-way zipper. It is assumed that the color of the zipper is the same as the main zipper. If you would like this zipper of a different color, please mention it in the note. The zipper is on both sle

The gloves are firmly attached to the Catsuit. It is actually an extended sleeve, which is widened and finished at the end.

Ankle gloves are actually an extension of the sleeves. The thumb is pierced through the hole.

The gloves are firmly attached to the Catsuit. The gloves have a separate thumb, the other 4 fingers are common. The thickness of Latex used in the manufacture of gloves is always only 0.40 mm. Please note the color of the gloves.

The gloves are firmly attached to the Catsuit. The seamless design of the gloves (technology by stretching to the mold) is limited to a thickness of 0.40 mm and only a limited color design. Select below in the command (Latex Glove Design}.

The gloves are firmly attached to the Catsuit, in a seamless design in a thickness of 0.40 mm. The glued nails extend beyond 10 mm with the fingertips and are made of Latex 0.80 mm. Nails in colors: black, red, white, yellow, medium blue, body banner and

The gloves are not firmly attached to the Catsuit, but are supplied with the Catsuit. The seamless design of the gloves (technology by stretching to the mold) is limited to a thickness of 0.40 mm and only a limited color design.

The gloves are not firmly attached to the Catsuit, but are supplied with the Catsuit. The glued nails extend beyond 10 mm with the fingertips and are made of Latex 0.80 mm. Nails in colors: black, red, white, yellow, medium blue, body banner and dark blue

The gloves are firmly attached to the Catsuit. The glued design has only about 3 mm wide seams along the inner sides of the fingers. The big advantage is the possibility of production in any color and thickness of Latex from our offer. Your Catsuit will n

The gloves are firmly attached to the Catsuit and have only about 3 mm wide seams along the inside of the fingers. The glued nails extend beyond 10 mm with the fingertips and are made of Latex 0.80 mm. Nails in colors: black, red, white, yellow, medium bl

The gloves are not attached to the Catsuit. The glued design has only about 3 mm wide seams along the inner sides of the fingers. The big advantage is the possibility of production in any color and thickness of Latex from our offer. Your Catsuit will now

The gloves are not attached to the Catsuit and have only about 3 mm wide seams along the inside of the fingers. The glued nails extend beyond 10 mm with the fingertips and are made of Latex 0.80 mm. Nails in colors: black, red, white, yellow, medium blue,

The sleeve ends with a reinforced seam. Gloves are not part of the suit.

On the inside of the forearm, there is about a 20 cm long 1-way zipper. It is assumed that the color of the zipper is the same as the main zipper. If you would like this zipper of a different color, please mention it in the note. The zipper is on both sle

The gloves are always firmly attached to the Catsuit. The gloves have a separate thumb, the other 4 fingers are common. The thickness of Latex used in the manufacture of gloves is always only 0.40 mm. Please note the color of the gloves.

Ankle gloves are actually an extension of the sleeves. The thumb is pierced through the hole.

The gloves are firmly attached to the Catsuit. The gloves have a separate thumb, the other 4 fingers are common. The thickness of Latex used in the manufacture of gloves is always only 0.40 mm. Please note the color of the gloves.

The gloves are made by stretching the technology, ie completely without gluing. The thickness of Latex used in the manufacture of gloves is always only 0.40 mm. The color of the gloves may be slightly different from the same color used on the Catsuit.

The gloves are made by stretching the technology, ie completely without gluing. The thickness of Latex used in the manufacture of gloves is always only 0.40 mm. The color of the gloves may be slightly different from the same color used on the Catsuit.

The gloves are made by stretching the technology, ie completely without gluing. The thickness of Latex used in the manufacture of gloves is always only 0.40 mm. The color of the gloves may be slightly different from the same color used on the Catsuit.

The gloves are made by stretching the technology, ie completely without gluing. The thickness of Latex used in the manufacture of gloves is always only 0.40 mm. The color of the gloves may be slightly different from the same color used on the Catsuit.

The gloves are made by stretching the technology, ie completely without gluing. The thickness of Latex used in the manufacture of gloves is always only 0.40 mm. The color of the gloves may be slightly different from the same color used on the Catsuit.

The gloves are made by stretching the technology, ie completely without gluing. The thickness of Latex used in the manufacture of gloves is always only 0.40 mm. The color of the gloves may be slightly different from the same color used on the Catsuit.

The gloves are made by stretching the technology, ie completely without gluing. The thickness of Latex used in the manufacture of gloves is always only 0.40 mm. The color of the gloves may be slightly different from the same color used on the Catsuit.

The gloves are made by stretching the technology, ie completely without gluing. The thickness of Latex used in the manufacture of gloves is always only 0.40 mm. The color of the gloves may be slightly different from the same color used on the Catsuit.

The gloves are made by stretching the technology, ie completely without gluing. The thickness of Latex used in the manufacture of gloves is always only 0.40 mm. The color of the gloves may be slightly different from the same color used on the Catsuit.

The gloves are made by stretching the technology, ie completely without gluing. The thickness of Latex used in the manufacture of gloves is always only 0.40 mm. The color of the gloves may be slightly different from the same color used on the Catsuit.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

Yellow solid. Available in thickness 0.40 mm, 0.80, 1.00 mm.

Black transparent. Available in thickness 0.25 mm, 0.40 mm. 0.60 mm, 0.80 mm.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

Light blue full. Available in thickness 0.40 mm.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

Body transparent. Available in thickness 0.25 mm, 0.40 mm, 0.80 mm, 1.00 mm.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

Red full. Available in thickness 0.25 mm, 0.40 mm, 0.60 mm, 0.80 mm, 1.00 mm.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves are made by stretching the technology, ie completely without gluing. The thickness of Latex used in the manufacture of gloves is always only 0.40 mm. The color of the gloves may be slightly different from the same color used on the Catsuit.

The gloves are made by stretching the technology, ie completely without gluing. The thickness of Latex used in the manufacture of gloves is always only 0.40 mm. The color of the gloves may be slightly different from the same color used on the Catsuit.

The gloves are made by stretching the technology, ie completely without gluing. The thickness of Latex used in the manufacture of gloves is always only 0.40 mm. The color of the gloves may be slightly different from the same color used on the Catsuit.

The gloves are made by stretching the technology, ie completely without gluing. The thickness of Latex used in the manufacture of gloves is always only 0.40 mm. The color of the gloves may be slightly different from the same color used on the Catsuit.

The gloves are made by stretching the technology, ie completely without gluing. The thickness of Latex used in the manufacture of gloves is always only 0.40 mm. The color of the gloves may be slightly different from the same color used on the Catsuit.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The gloves have a glued, (about 3 mm thin) seam on the inside of the fingers. An indisputable advantage, however, is the possibility of producing another thickness of Latex (according to the possibilities of a specific color) from our offer.

The pants are finished with a reinforced seam. Socks are not part of the suit.

Both pants on the outside of the ankle will have a 1-way zipper about 18 cm long

The socks are in a design with a stirrup under the heel. The stirrup is based on trousers and is therefore always in the color of trousers (Catsuit).

The socks are firmly attached to the pants. If you require socks in a different color (see the choice of sock colors below), it is possible that (for some models) they will not respect the design elements that go from the foot to the heel or the foot.

The socks are not attached to the trousers, but are included in the delivery. They will therefore be delivered separately and in colors according to your choice of Latex sock colors (see below).

The socks are attached to the trousers and are made in a design where each toe is surrounded by Latex. It is possible to produce them only in black and a thickness of 0.40 mm.

The socks are separate from Catsuit (separately), but are included in the delivery. The socks are made in a design where each toe is surrounded by Latex. It is possible to produce them only in black and a thickness of 0.40 mm.

30

30

30

30

30

Khaki, 0.25 mm thick

Lilac banner

Lilac banner

The head mask is not part of the suit or part of the delivery.

The head mask is separate from the suit, but is part of the delivery. It is a mask glued with the technology of a forehead wedge and a vertical facial seam. If you want another mask, select it from the category: [Accessories] <> [Head Masks] and wri

The head mask is firmly attached to the suit. It is a mask glued with the technology of a forehead wedge and a vertical facial seam. If you would like to attach another mask, select it from the category: [Accessories] <> [Head Masks] and type in a n

30

30

30

30

30

Khaki, 0.25 mm thick

Lilac banner

Lilac banner

The head mask is not included in the delivery.

This is the color of the wedge and the entire back of the mask - as shown. Red color, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Color black, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Light blue color, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Yellow color, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Green olive color, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Pink color, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Spring green color, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Orange color (as in the picture), Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Brown color, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Medium blue color, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Purple color, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Light red color, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Red plum color, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Children's pink color, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Color green turquoise, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Royal blue color, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. White color, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. White cream color, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Dark blue color, Latex thickness used to make the mask 0.40 mm.

Natural green. Available in thickness 0.25 mm.

Pink Lilac. Available in thickness 0.40 mm.

Blue turquoise. Available in thickness 0.25 mm.

This is the color of the wedge and the entire back of the mask - as shown. Body color banner, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Color blue transparent, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Color black transparent, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Green transparent color, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Purple violet color, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Gray transparent color, Latex thickness used to make the mask 0.40 mm.

Pink transparent. Available in thickness 0.25 mm, 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Purple metallic color, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Gold metallic color, Latex thickness used for mask production 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Silver metallic color, Latex thickness used for mask production 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Blue metallic color, Latex thickness used for mask production 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Black metallic color, Latex thickness used for mask production 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Pink metallic color, Latex thickness used for mask production 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Red metallic color, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Bronze metallic color, Latex thickness used for mask production 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Green metallic color, Latex thickness used for mask production 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Tin metal color, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Tin platinum metallic color, Latex thickness used for mask production 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Tin color blue peacock metallic, Latex thickness used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Color blue metallic electric, thickness Latex used for mask production 0.40 mm.

This is the color of the wedge and the entire back of the mask - as shown. Color green metallic electric, thickness Latex used for mask production 0.40 mm.

This is the color of the wedge and the entire back of the mask - according to the picture. Color body transparent, thickness of Latex used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - according to the picture. Color neon magenta, thickness of Latex used to make the mask 0.40 mm.

This is the color of the wedge and the entire back of the mask - according to the picture. The color is neon lemon, the thickness of the Latex used to make the mask is 0.40 mm.

This is the color of the wedge and the entire back of the mask - according to the picture. The color is neon yellow, the thickness of the Latex used to make the mask is 0.40 mm.

BOS67372CLI

This is the color of the wedge and the entire back of the mask - according to the picture. The color is neon purple, the thickness of the Latex used to make the mask is 0.40 mm.

This is the color of the wedge and the entire back of the mask - according to the picture. The color is orange, the thickness of the Latex used to make the mask is 0.40 mm.

This is the color of the wedge and the entire back of the mask - according to the picture. The color is neon red, the thickness of the Latex used to make the mask is 0.40 mm.

The head mask is not included in the delivery.

The mask has no holes for the eyes. Attention view from the mask is impossible.

The eye openings are small (only about 1 cm in diameter). The view from the mask may be limited. We recommend that you note the size of the center of the eyes in the horizontal plane.

Classic open eye design, provides the best possible view from the mask.

The mask reveals the entire face, there is a vertical zipper at the back.

The mask has a curtain of thin Latex body color in the space in front of the eyes. Attention, the view from the mask is very limited or impossible.

In the area in front of the eyes, small holes are punched in the Latex, which provide a relatively good view while maintaining the wearer's intimacy.

In the space in front of each eye, there is a short horizontal one-way zipper.

In the space in front of the eyes, there is a horizontal one-way zipper.

In the space in front of each eye, there is a vertical one-way zipper.

The head mask is not included in the delivery.

The mouth opening is closed. Beware of breathing is impossible in this mask. The chosen mask option always requires a combination with holes for the nostrils.

Classic open mouth design.

The opening for the mouth is large and partially affects the chin and nose.

The opening is formed by a reinforced edge of the entrance (similar to an oral condom). The color of the ring is optional - please state in the note.

The oral condom consists of a reinforced edge (optional color) and a 10 cm long condom. The thickness of the Latex condom is 0.40 mm as standard (possibility of production in all colors). On request also possible with Latex 0.25 mm (limited number of colo

There is a one-way horizontal zipper in the space in front of the mouth.

The front of the Catsuit is smooth, without any adjustments.

There are 2 horizontal one-way zippers on the front of the chest, in front of the breasts

There are 2 vertical one-way zippers on the front of the chest, in front of the chest.

There are 2 oblique one-way zippers on the front of the chest, in front of the breasts.

On the front of the chest, there are holes for the nipples. The edges of the holes are reinforced, so the nipples are highlighted.

On the front of the chest, there are circular holes for the breasts.

On the front of the chest, in front of the breasts is a long 4-way back. Please note that this selection cannot be combined with a vertical front zipper.

The crotch is solved without special modifications - it remains smooth, or with zippers according to your choice according to the parameter [location of the zipper-select]

A condom for the penis and testicles is attached to the Catsuit. Length 14 cm and diameter 3.5 cm (it is also possible 18 / 3.8 cm). Color is optional (please note). Only in black is the condom made by seamless technology, in other colors a glued seam is

A condom for the penis and testicles + anal condom is attached to the Catsuit. Condom for penis length 14 cm and diameter 3.5 cm (possibility of 18 / 3.8 cm). Only in black is the condom made by seamless technology, in other colors a glued seam is visible

An anal condom is attached to the Catsuit. The color of the condom itself and the reinforced edge is optional, - state in the note. The condom cannot be combined with zippers leading across the crotch.

Catsuit has a circular hole in the lower abdomen in place of the men's penis. The opening can be closed with a round cap provided with metal patents for attachment. By default, the color of the cap is the same as the color of the Catsuit. If a differe

A vaginal condom is attached to the Catsuit. The color of the condom itself and the reinforced edge is optional, - state in the note. The condom cannot be combined with zippers leading across the crotch.

A vaginal and anal condom are attached to the Catsuit. The color of the condoms themselves and the reinforced edges is optional, - state in the note. With this modification of two condoms, zippers leading across the crotch cannot be combined.

An anal condom is attached to the Catsuit. The color of the condom itself and the reinforced edge is optional, - state in the note. The condom cannot be combined with zippers leading across the crotch.

The catsuit has a circular hole at the back at the anus. The opening can be closed with a round cap provided with metal patents for attachment. By default, the color of the cap is the same as the color of the Catsuit. If a different color is required, ple

In the initial treatment, our products are treated with dry powder inside the suit. Latex is matt on the inside and outside. This treatment is best for storage and transport. After dressing, we recommend using an external gloss to achieve a shiny appearan

Pure silicone is an excellent polish. It lasts a long time, is pleasant and is not sticky to the touch. We recommend this adjustment for customers who want to have their Catsuit treated as soon as the shipment is delivered.

This treatment is a combination of inner silicone for easy dressing and outer silicone for perfect shine. This is a good choice for customers who want to have their catsuit ready for immediate dressing right out of the box.

The latex is immersed in a chemical bath of a mixture of chlorine and ammonia. The pores of the Latex surface are closed and the Latex becomes smooth, resistant to embrittlement. More info in the paragraph <Latex surface treatment>. The process exte

We try to deliver Latex clothing as soon as possible, but custom production requires care, precision and adherence to gluing technologies. As a small consolation, we can promise you that the result will be worth it. ..